Eaton Green Motion XCI000411 handleiding
Handleiding
Je bekijkt pagina 10 van 107
2.2 Suggested protections during the installation
2.3 Protection from electric shock
An electric shock can be fatal.
Avoid touching internal or external parts normally live while the system is powered on.
Cables and connections must always be secured, in good condition, insulated and suitably sized.
For obvious reasons, the manufacturer cannot envisage all potential types of installations and locations where the equipment
might be installed; the customer must therefore clearly inform the manufacturer of specific conditions of installation. Eaton
declines any responsibility if the unit is incorrectly installed.
The professional and qualified personnel must be correctly informed. The professional and qualified personnel must
therefore read and follow the technical instructions contained in the manual and in the enclosed documentation.
The instructions provided in this manual do not replace the safety regulations of the installation and operational technical
data printed on the products, nor do they replace the current safety standards enforced in the country where the equipment
is installed, and the rules dictated by common sense.
The manufacturer can provide theoretical or practical training to professional and qualified personnel, either on its site or on
the customer’s premises, as specified at the time of drawing up the contract.
The equipment must not be used if any operational fault is identified.
Temporary repairs should be avoided; repair work must be carried out only with genuine spare parts, which must be
installed in accordance with the intended use.
The responsibilities deriving from the commercial components are delegated to the respective manufacturers. Avoid
touching the equipment enclosure during the equipment operation.
The equipment enclosure could overheat during its operation.
After switching off the equipment, the surface of the equipment could still be hot. In the event of fire, CO
2
foam extinguishers
must be used, and self-vacuum systems must be used to put out fires in enclosed spaces.
If the noise level exceeds legal limits, the working area must be restricted, and anyone who has access to the area must wear
ear defenders or ear plugs.
The noise level produced by the equipment in normal working conditions is lower than 50 dB.
During the installation process, special attention must be paid to fixing the equipment and its components. At this stage,
restricting or preventing access to the installation area is recommended.
Professional and qualified personnel are recommended to wear clothing and personal protective equipment (PPE) provided
by their employer. Professional and qualified personnel must not wear clothes or accessories that could start fires or
produce static electricity, or any item of clothing that could affect personal safety. When carrying out any operation on the
equipment, clothes and instruments must be suitably insulated.
Professional and qualified personnel must NOT access the equipment with bare feet or wet hands.
Professional and qualified personnel must always ensure that nobody else is able to reset or operate the equipment during
maintenance and must report any fault or deterioration caused by wear or by aging, in order to restore the correct safety
conditions.
Professional and qualified personnel must always pay attention to the working environment to ensure it is well lit and has a
suitable escape route.
A first aid kit must be provided.
10
GREEN MOTION BUILDING INSTALLATION MANUAL MN191028EN April 2024 www.eaton.com
Bekijk gratis de handleiding van Eaton Green Motion XCI000411, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eaton |
| Model | Green Motion XCI000411 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16416 MB |
