Easymaxx 12803 handleiding
Handleiding
Je bekijkt pagina 12 van 28
EN
12
is to be operated with the USB cable,
connect the end with the barrel
connector to the barrel connector
input on the product and connect the
other end with the USB connector to
a power source, e.g. a computer, or
via a suitable mains adapter that sup-
plies at least 1 A (not supplied with
the product) at a plug socket.
3. Select and insert – Select the letters
and emojis you want and insert them
into the rails. Make sure when you do
this that the letters and symbols fit in
the rails at the top and bottom.
4. Switch on / off – Move the On / Off
switch to theI(On) position.
To switch the product off again, move
the On / Off switch to the0 (Off)
position.
5. Select colour / mode – By pressing
the buttons on the remote control, the
following functions can be called up:
• Mode (flashing / constant light)
• Multi Color (changing colour)
• Colour selection (12 colours)
• Timer buttons 4H, 8H (first select
the function you want and then
press the timer button): daily ligh-
ting time in hours. Example: With
4H the light switches off after 4
hours and then switches back on
after 20 hours.
• ON / OFF Switch the lightbox
on / off (standby mode)
L
All the buttons on the remote
control only work if the On / Off
switch has previously been set to
the I(On) position.
CLEANING AND STORAGE
Please Note!
■ Do not use any sharp or abrasive
cleaning agents! These could damage
the surfaces.
• Disconnect the product from the
mains power if necessary.
• Wipe down the product with a soft,
dry cloth. Remove more stubborn
dirt with a damp cloth.
• Store the product in a cool and dry
place protected from direct sunlight
out of the reach of children and
animals.
• If the product is not going to be used
for a prolonged period, take out the
batteries.
TROUBLESHOOTING
If the product does not work properly,
check whether you are able to rectify the
problem yourself. If the problem cannot
be solved with the steps below, contact
the customer service department.
Do not attempt to repair the
product yourself!
The LEDs do not light up.
The USB cable is not connected correctly
to the product or the USB mains adapter.
► Check the connection and correct it.
The USB mains adapter is not inserted in
the plug socket correctly.
► Correct the fit.
The plug socket is defective.
► Try another plug socket.
The batteries are not inserted correctly.
► Correct the fit.
The batteries are empty.
► Insert new batteries.
00954_00955_12803_DE-EN-FR-NL_A5_V2.1.indb 1200954_00955_12803_DE-EN-FR-NL_A5_V2.1.indb 12 04.07.2023 10:13:2304.07.2023 10:13:23
Bekijk gratis de handleiding van Easymaxx 12803, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Easymaxx |
| Model | 12803 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3260 MB |
