Easy Home GT-HDG-01 handleiding
Handleiding
Je bekijkt pagina 17 van 24
Use
17
• Water splashes may occur during use, especially shortly after
switching on. That is normal.
• During use, both indicator lights repeatedly go on and off.
This is not an error, but indicates that the available steam has
been used up and is being automatically generated again.
Interrupting your work is usually not necessary.
Refill water
1. Disconnect the power plug from the socket.
2. Press the steam button to release the steam pressure in the device.
Keep the button pressed until no more steam comes out.
3. Wait at least 10 minutes to allow the steam cleaner to cool down further.
4. Place a cloth on the tank cap, as the cap may still be hot if it has been in use for
a long time. In addition, a small amount of steam may still flow out of the tank
opening when you open it.
5. Press down the tank cap and then unscrew it counter-clockwise.
6. Proceed as described in the "Filling with water” section.
After use
WARNING!
Burn hazard!
Faulty handling of the device can result in injuries.
− The stretch cloth (only when using the floor nozzle) gets very
hot. Allow it to cool off before removing it after use.
1. Disconnect the power plug from the socket.
2. Allow the device to cool off before putting it away or cleaning it.
Buch_AUS_Handdampfreiniger.indb 17Buch_AUS_Handdampfreiniger.indb 17 14.09.2022 09:45:1714.09.2022 09:45:17
Bekijk gratis de handleiding van Easy Home GT-HDG-01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Easy Home |
| Model | GT-HDG-01 |
| Categorie | Stoomreiniger |
| Taal | Nederlands |
| Grootte | 1684 MB |