Easy Home GT-HDG-01 handleiding
Handleiding
Je bekijkt pagina 16 van 24
Use
16
− If there are large temperature differences between the inner
and outer pane or glass or mirror surface and hot steam, there
is a risk of injury from glass breakage and splinters. Always
steam cold surfaces carefully from a longer distance and heat
up slowly.
NOTE!
Risk of damage!
Improper handling of the device may result in damage.
− Make sure that the surface to be cleaned is hard, scratch-
resistant and hard-wearing when you work on it directly with
the brushes. Other surfaces may become damaged.
1. Insert the power plug into a socket.
The left indicator light
6
lights up orange and
the device heats up. As soon as sufficient steam
has been produced, the left-hand indicator
light goes out and the right-hand indicator light
lights up green. The appliance is on ready for
use.
2. Slide the safety switch
3
to the side.
3. Press the steam button
2
, to generate a shot
of steam.
− The harder and longer you keep the steam
button pressed down, the greater the
amount of steam.
− First point the device at a cloth until the
steam comes out evenly without any large
drops of water.
− Available steaming time: 8 to 10 minutes.
4. Aim the hot steam at the area to be cleaned and proceed according to the selected
attachment, refer to the “Select accessory” section.
5. Release the steam button to interrupt the steam shot.
Buch_AUS_Handdampfreiniger.indb 16Buch_AUS_Handdampfreiniger.indb 16 14.09.2022 09:45:1714.09.2022 09:45:17
Bekijk gratis de handleiding van Easy Home GT-HDG-01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Easy Home |
| Model | GT-HDG-01 |
| Categorie | Stoomreiniger |
| Taal | Nederlands |
| Grootte | 1684 MB |