Duromax XP11000iHT handleiding
Handleiding
Je bekijkt pagina 71 van 86
Remove spark plug
Unscrew the spark plug from the generator using the spark
plug wrench included with this product.
4.
Inspect spark plug and gap
Visually inspect the spark plug. If it is cracked or chipped,
discard and replace it with a new spark plug. We recommend
using an NGK BPR6ES spark plug. Measure the plug gap with
a gauge. The gap should be 0.7-0.8 mm (0.028-0.031 in).
5.
Clean and re-gap
Reassemble generator
If you are re-using the spark plug, use a wire brush to clean
any dirt from around the spark plug base and then re-gap the
spark plug.
Reinstall the spark plug, spark plug cap, valve cover insulator,
and the side service cover.
6.
7.
71
Bekijk gratis de handleiding van Duromax XP11000iHT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Duromax |
| Model | XP11000iHT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 37294 MB |