Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 99 van 264
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023 97
Bobbin monitor mode ( p. 99)
Point position
The distance of the needle from the mate-
rial can be adjusted to allow precise
positioning of the sewing material when
starting sewing.
The value entered corresponds to the
degree number on the handwheel.
Value range
000 – 359 [°]
Gap
Value for the gap between the motor-driven
edge guide and the needle (factoring in the
defined safety distance to the sewing feet).
Value range
08.0 – 45.0 [mm]
(depends on the sewing equip-
ment)
Flat Sew
Transport correction at zero difference for
Flat Sew.
Value range
-20–20
Material thickness detection
Material thickness detection Value range
On/Off
( p. 101)
Stitch length The stitch length changes slightly
depending on the material
thickness. For this reason, the
stitch length can be adjusted to
different material thicknesses by
the software.
Needle thread tension Depending on the material thick-
ness, the needle thread tension
can be adjusted to different mate-
rial thicknesses by the software.
Sewing foot pressure The sewing foot pressure can be
adjusted at different material thick-
nesses by the software.
Max. Speed The maximum sewing speed can
be adjusted to different material
thicknesses by the software.
Icon Parameter Settings
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
