Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 26 van 264
Operation
24 Operating Instructions D888 e-con - 00.0 - 12/2023
4.4.2 For two-needle machines
Fig. 6: Inserting or changing the needle
To change the needle in a two-needle machine:
1. Turn the handwheel until the needle bar (1) has reached
the upper end position.
2. Unlock the roller foot (5).
3. To change the right needle, loosen the right screw (2).
4. To change the left needle, loosen the left screw (2).
5. Pull the needles downwards out of the needle holder (3).
6. Insert each new needle into the corresponding hole of
the needle holder (3) until it reaches the stop.
Important
Align the needles so that the grooves of the needle (4) point towards
the hook. As viewed from the operator level, the groove (4) of the
left needle must point to the left, while the groove (4) of the right
needle must point to the right.
7. Tighten the screws (2).
(1) - Needle bar
(2) - Screws
(3) - Needle holder
(4) - Groove
(5) - Roller foot
①
④
⑤
②
④
③
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
