Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 221 van 264
Troubleshooting
Operating Instructions D888 e-con - 00.0 - 12/2023 219
3012 Error U100 V (I²T) overload • one or several stepper motors defective
3020 Error U24 V start-up error • Disconnect magnet plug; replace control if
error is not corrected: Replace the control
3021 Error U24 V short circuit • Disconnect magnet plug; replace control if
error is not corrected: Replace the control
3022 Error U24 V (I²T) overload • One or several magnets defective
3023 Error U48 V start error • Disconnect magnet plug; replace control if
error is not corrected: Replace the control
3024 Error U48 V short circuit • Disconnect magnet plug; replace control if
error is not corrected: Replace the control
3025 Error U48 V (I²T) overload • One or more magnets defective
3030 Error Motor phase failure • Replace the control
3104 Warning Pedal is not in position 0 • When switching the control on, take your
foot off the pedal
3109 Warning Operation lock • Check tilt sensor on machine
3110 Information Right thread tension magnet
is not connected
• Check the connection of right thread
tension magnet
3111 Information Left thread tension magnet
is not connected
• Check the connection of left thread
tension magnet
3112 Information Reference failure (right)
thread tension
• Restart the machine
3113 Information Reference failure left thread
tension
• Restart the machine
3150 Information Maintenance required • For information on maintenance of the
machine, see the service instructions for
the machine
3161 Information Bobbin winder over
temperature
• The bobbin winder was running too long.
The bobbin winder is deactivated for
30 minutes.
3210 Information Needle thread monitor (right) • Check the needle thread (right).
3211 Information Bobbin thread is broken • Check the bobbin thread
3212 Information Needle thread monitor (right) • Check the needle thread (left).
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
