Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 217 van 264
Troubleshooting
Operating Instructions D888 e-con - 00.0 - 12/2023 215
2484 Error Stepper card X60 parameter
initialization (Edge guide)
• Perform software update
• Check selection of class
2485 Error Stepper card X60 insulation
error (Edge guide)
• Check motor phase and PE for low-
impedance connection
• Replace encoder
• Replace sewing motor
2487 Error Stepper card X60 transport
interval failure (Edge guide)
• Perform software update
• Check selection of class
2488 Error Stepper card X60 reference
drive failure (Edge guide)
• Check for stiff movement
• Replace encoder
• Replace motor
2501 Error Stepper card X70 reference
drive timeout (Upper puller)
• Check reference sensor
2505 Error Stepper card X70 stepper
motor blockage (Upper
puller)
• Check for stiff movement
2521 Error Stepper card X70 encoder
plug (Sub-D, 9-pin) not
connected
• Connect encoder cable to the control, use
correct connection
2522 Error Stepper card X70 flywheel
position not found
• Check stepper motor 1 for stiff movement
2530 Error Stepper card X70 not
responding
• Perform software update
• Replace the control
2531 Error Stepper card X70 initializa-
tion failure
• Perform software update
• Check selection of class
2571 Error Stepper card X70 watchdog
(Upper puller)
• Perform software update
• Check selection of class
2572 Error Stepper card X70 motor
overload/overvoltage/over-
current (Upper puller)
• Check selection of class
• Replace the control
• Replace encoder
• Replace stepper motor
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
