Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 216 van 264
Troubleshooting
214 Operating Instructions D888 e-con - 00.0 - 12/2023
2431 Error Stepper card X60
initialization failure
• Perform software update
• Check selection of class
2471 Error Stepper card X60 Watchdog
(Edge guide)
• Perform software update
• Check selection of class
2472 Error Stepper card X60 motor
overload/overvoltage/over-
current (Edge guide)
• Check selection of class
• Replace the control
• Replace encoder
• Replace stepper motor
2473 Error Stepper card X60 Sewing
motor encoder not connected
(Edge guide)
• Replace the control
2474 Error Stepper card X60 sewing
motor encoder not initialized
(Edge guide)
• Perform software update
• Check selection of class
2475 Error Stepper card X60 init posi-
tion not found (Edge guide)
• Check for stiff movement
• Replace encoder
• Replace motor
2476 Error Stepper card X60 not
enabled (Edge guide)
• Replace the control
2477 Error Stepper card X60 overload
(Edge guide)
• Check for stiff movement
• Replace encoder
• Replace motor
2478 Error Stepper card X60 encoder
failure (Edge guide)
• Replace encoder
2479 Error Stepper card X60 Current
sensor failure (Edge guide)
• Replace the control
2480 Error Stepper card X60 Incorrect
stepping motor direction of
rotation (Edge guide)
• Replace encoder
• Check if plugs have been mixed up
• Check the wiring in the machine distribu-
tor and change it if necessary
2481 Error Stepper card X60 reference
drive failure (Edge guide)
• Check for stiff movement
• Replace encoder
• Replace motor
2483 Error Stepper card X60 overcurrent
(Edge guide)
• Replace the control
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
