Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 213 van 264
Troubleshooting
Operating Instructions D888 e-con - 00.0 - 12/2023 211
2278 Error Stepper card X40 encoder
failure (Foot lifting)
• Replace encoder
2279 Error Stepper card X40 Current
sensor failure (Foot lifting)
• Replace the control
2280 Error Stepper card X40 Incorrect
stepping motor direction of
rotation (Foot lifting)
• Replace encoder
• Check if plugs have been mixed up
• Check the wiring in the machine distribu-
tor and change it if necessary
2281 Error Stepper card X40 reference
drive failure (Foot lifting)
• Check for stiff movement
• Replace encoder
• Replace motor
2283 Error Stepper card X40 overcur-
rent (Foot lifting)
• Replace the control
2284 Error Stepper card X40 parameter
initialization (Foot lifting)
• Perform software update
• Check selection of class
2285 Error Stepper card X40 insulation
error (Foot lifting)
• Check motor phase and PE for low-
impedance connection
• Replace encoder
• Replace sewing motor
2287 Error Stepper card X40 transport
interval failure (Foot lifting)
• Perform software update
• Check selection of class
2288 Error Stepper card X40 reference
drive failure (Foot lifting)
• Check for stiff movement
• Replace encoder
• Replace motor
2301 Error Stepper card X50 reference
drive timeout (Foot stroke)
• Check reference sensor
2305 Error Stepper card X50 stepper
motor blockage
• Check for stiff movement
2321 Error Stepper card X50 encoder
plug (Sub-D, 9-pin) not
connected
• Connect encoder cable to the control,
use correct connection
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
