Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 212 van 264
Troubleshooting
210 Operating Instructions D888 e-con - 00.0 - 12/2023
2205 Error Stepper card X40 stepper
motor blockage
• Check for stiff movement
2221 Error Stepper card X40 encoder
plug (Sub-D, 9-pin) not
connected
• Connect encoder cable to the control, use
correct connection
2222 Error Stepper card X40 flywheel
position not found
• Check stepper motor 1 for stiff movement
2230 Error Stepper card X40 not
responding
• Perform software update
• Replace the control
2231 Error Stepper card X40 initializa-
tion failure
• Perform software update
• Check selection of class
2252 Error Stepper card X40
overcurrent
• Check for stiff movement
2271 Error Stepper card X40 watchdog
(Foot lifting)
• Perform software update
• Check selection of class
2272 Error Stepper card X40 motor
overload/overvoltage/over-
current (Foot lifting)
• Check selection of class
• Replace the control
• Replace encoder
• Replace stepper motor
2273 Error Stepper card X40 sewing
motor encoder not con-
nected (Foot lifting)
• Replace the control
2274 Error Stepper card X40 sewing
motor encoder not initialized
(Foot lifting)
• Perform software update
• Check selection of class
2275 Error Stepper card X40 init position
not found (Foot lifting)
• Check for stiff movement
• Replace encoder
• Replace motor
2276 Error Stepper card X40 not
enabled (Foot lifting)
• Replace the control
2277 Error Stepper card X40 I²t
(Foot lifting)
• Check for stiff movement
• Replace encoder
• Replace motor
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
