Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 151 van 264
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023 149
Sewing foot lift at stop Value range
On/Off
Height of sewing foot lift at stop Value range
01 – 20 [mm]
(depending on subclass)
Backwards
When the parameter is activated,
the section is sewn backwards.
Value range
On/Off
Center guide
(only on two-needle machines, optional
additional equipment)
Value range
On/Off
Puller
(optional additional equipment)
The puller supports the transport of the
sewing material. The feed of the two rollers
is calculated automatically based on the
stitch length of the machine. An adjustment
may be necessary depending on the
application.
The puller can be adjusted separately.
The input is in percent: a positive value
increases the roller feed while a negative
value reduces the feed.
On/Off
Correction top roller
Value range
-100 – 100 [%]
Correction bottom roller
Value range
-100 – 100 [%]
Gap
(optional additional equipment)
The edge guide helps to precisely position
the sewing material. The value set indicates
the distance between the needle and edge
guide/material edge.
Value range
08.0 – 45.0 [mm]
Light barrier
(optional additional equipment)
The light barrier detects the beginning
and the end of the material. After a signal
was detected, sewing can continue
automatically with the specifically set
parameters.
Value range
On/Off
( p. 152)
Thread tension sensor mode
(Access only after activation in
the machine configuration
( p. 153)
Icon Parameter Settings
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
