Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 137 van 264
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023 135
Software / Stitch Counter
In Software mode, the
bobbin is monitored by
the software based on
the number of stitches
sewn.
Counter Type
4 different counters can be
applied. The following 3
sub-items can be set for
each of the counters.
Value range
A/B/C/D
Counter value
Bobbin supply capacity in
stitches. This is a very
variable value, which
depends on the size of the
bobbin and the thickness of
the thread.
Value range
00000 – 99999
[stitches]
Sewing stop
Sewing stops and a notice is
shown on the display when
the bobbin is detected to be
nearly empty. If the
parameter is not activated,
only the LEDs on the
machine arm give a warning
if the bobbin is empty.
Value range
On/Off
Sewing foot lower position Value range
On/Off
Reset necessary
It is only possible to resume
sewing after changing
the bobbin and confirming
the message on the control
panel.
Value range
On/Off
Menu item Setting 1 Setting 2
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
