Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 136 van 264
Programming Commander DELTA
134 Operating Instructions D888 e-con - 00.0 - 12/2023
5.9.5.2 Setting the Bobbin monitor mode parameters
The amount of remaining thread on the bobbin can be monitored
optically or by software using this setting.
Menu item Setting 1 Setting 2
Off
Monitor
Monitor mode can only
be used if the additional
equipment of the
remaining thread
monitor is present on
the machine. Monitor
mode allows for optical
monitoring of the
bobbin.
Sewing stop
Sewing stops and a notice
is shown on the display
when the bobbin is detected
to be nearly empty. If the
parameter is not activated,
only the LEDs on the
machine arm give a warning
if the bobbin is empty.
Value range
On/Off
Sewing foot lower position Value range
On/Off
t Clean
Duration for which the lens is
blown clear with compressed
air. The process takes place
as the thread is cut.
Value range
0000–5000 [ms]
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
