Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 132 van 264
Programming Commander DELTA
130 Operating Instructions D888 e-con - 00.0 - 12/2023
Additional value needle thread tension (+)
The second value for the needle thread
tension can be switched on using the
buttons on the push button panel or the
tile on the control panel.
Value range
01 – 99 [%]
Gap (second value)
The second value for the gap can be
switched on using the button on the
push button panel or the tile on the
control panel.
Value range
08.0 – 45.0 [mm]
Program Cycle
Next program
A subsequent program can be defined.
Input via program number.
Program Cycle
The program is executed as a loop,
which is useful, for instance, for
ornamental stitch seams.
You select the start segment and the
end segment from a program and
define how often you wish the selected
segments to be sewn.
On/Off
Start Segment
Value range 00 – 30
(0 = the cycle starts with the first
segment)
End Segment
Value range 00 – 30
(0 = the cycle ends with the last
segment)
Repetitions
Value range 00 – 99
(0 = the cycle continues until the next
segment is activated manually)
Main Parameter
Needle thread clamp
The needle thread clamp is closed at
the 1
st
stitch of the seam to ensure that
the needle thread lies on the underside
of the sewing material
Value range
On/Off
Needle cooling
Activate needle cooling.
Value range
On/Off
Icon Parameter Settings
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
