Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 128 van 264
Programming Commander DELTA
126 Operating Instructions D888 e-con - 00.0 - 12/2023
To exit Teach-In:
1. Cut off the threads.
A window for exiting the program is displayed:
• Discard seam: The window closes and the started seam is
reset.
• Append seam: The started seam is stored and a new seam
is appended.
• Finish teach: The program is saved and teach-in is fin-
ished.
Sewing foot lifted
This function is used to lift the sewing
foot automatically. If the function is
executed within the seam segment,
the automatic sewing foot lift refers
to the sewing stop. Otherwise,
the function refers to the seam seg-
ment end, e.g. after thread cutting.
Value ranges
On/Off
Setting the Segment parameters
( p. 114)
Setting the Seam End parameters
( p. 115)
Thread trimmer active
Button to enable/disable the thread
trimmer
Value ranges
On/Off
Needle thread clamp
Can only be adjusted before the first
stitch of a segment.
Value ranges
On/Off
Fullness type
Switch between top and bottom full-
ness type.
Value range
Top/Bottom
Backwards
Stitches in segment will be sewn
backwards.
Can only be adjusted before the first
stitch of a segment.
Value ranges
On/Off
Gap
(optional additional equipment)
Gap of motor driven edge guide to the
needle, considering the defined safety
clearance to the sewing feet.
Value ranges
On/Off
Icon Parameter Setting
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
