Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 127 van 264
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023 125
Icon Parameter Setting
Seam Parameter
Stitch length
Can only be adjusted before the first
stitch of a segment.
Value range
0.00 – 6.00 [mm]
(depending on the sewing equipment
and the subclass)
Needle thread tension Value range
01 – 99
Fullness top Value range
-06–16
Fullness botton Value range
-06–16
Sewing foot pressure Value range
01 – 20
Max. Speed
It is possible to reduce the maximum
sewing speed at this point. The maxi-
mum sewing speed can be set in the
software at the Technician level.
Value range
0150 – 3500 [rpm]
(depending on subclass)
Automatic skip to next seam segment
Automatic stitch count active or
inactive.
Value ranges
On/Off
Sewing stop
Automatic sewing stop at segment
end. The pedal has to be released to
continue the sewing process. 0 = Off,
1= On
Value ranges
On/Off
Bartack at seam begin
Can only be adjusted before the first
stitch of a segment.
Value range
On/Off
( p. 111)
Bartack at seam end Value range
On/Off
( p. 115)
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
