Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 118 van 264
Programming Commander DELTA
116 Operating Instructions D888 e-con - 00.0 - 12/2023
Adjustments for seam end bartack parameters
Number of stitches backwards Value range
01 – 50 [stitches]
Number of stitches forward Value range
01 – 50 [stitches]
Number of bartack sections
A bartack consists of several sections.
If the sewing direction is changed, a new
section is started. The number of sections
in a bartack can be set here.
Value range
01 – 99
Stop-Time for direction change
The waiting time at the turning points
(e.g. for a change of sewing direction)
is set at this point. A short waiting time in
milliseconds should ensure consistent
seam quality (ornamental-stitch bartack).
Value range
0000–1000 [ms]
Stitch length default
If this function is active, the same needle
stitch length is used for the bartack as the
one set in Manual mode. If this function is
deactivated, a custom input can be
entered.
On/Off
Stitch length of backwards stitches
Value range
01.0 – 12.0 [mm]
(depending on subclass)
Stitch length of stitches forward
Value range
01.0 – 12.0 [mm]
(depending on subclass)
Sewing speed Value range
0050 – 2000 [rpm]
Single stitches per pedal
If this function is activated, each stitch in the
bartack can be sewn individually by pressing
the pedal. This function can only be used
meaningfully if the speed is set very low for
the bartack.
Value range
Off
With bartack speed
With pedal speed
Icon Parameter Settings
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
