Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 246 van 286
Troubleshooting
244 Operating Instructions D867 e-con - 00.0 - 06/2023
9958 Warning A function of the Perfect
Quality Sensor (PQS) is
active
• A function of the Perfect Quality Sensor
(PQS) is active. Therefore the lifting
height or the needle position could
change automatically.
9961 Warning Material thickness above
maximum limit
• The current material thickness exceeds
the maximum permissible limit.
9962 Warning Material thickness below
minimum limit
• The current material thickness falls below
the maximum permissible limit.
9963 Warning Please Wait! • Please wait for the ongoing operation to
be finished
9964 Warning Edge Guide in Wrong
Position
• Edge Guide must be in the right position
9965 Warning Select target position • Select target position
9966 Warning Thread Tension too low
(Warning)
• Thread Tension too low (Warning)
9967 Warning Edge Guide in Wrong
Position
• Edge Guide must be in the right position
9968 Warning PQS not connected • PQS is activated but not connected,
please check the connection to the PCB
or call the DA service
9969 Warning Thread Tension too high
(Warning)
• Thread Tension too high (Warning)
9970 Warning The limit values of the thread
tension have been exceeded
too often!
• The limit values of the thread tension
have been exceeded too often!
9971 Warning The thread tension value
does not change. The thread
may be broken or the connec-
tion to the sensor is lost.
• The thread tension value does not
change. The thread may be broken or the
connection to the sensor is lost.
9972 Warning Scan required • Please scan the RFID tag
9973 Warning Another scan required • Please scan the same RFID tag again
9974 Warning Scan again as RFID tags did
not match
• Please scan the same RFID tag as before
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
