Durkopp Adler D867 e-con handleiding

286 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 245 van 286
Troubleshooting
Operating Instructions D867 e-con - 00.0 - 06/2023 243
9947 Warning The stitch length adjustment
needs to be calibrated.
The maximum stitch length has changed.
The stitch length must be recalibrated.
9948 Information Thread Tension must be
recalibrated
Please recalibrate the needle thread tension:
Calibrate the needle thread tension with
parameter T 62 05
Additionally on two needle machines: cal-
ibrate the left needle thread tension with
parameter T 62 06
9951 Warning Please press Service stop Please press the Service stop button to
activate it
9953 Warning Desk is positioning Caution!
Height of the desk is being adjusted. Pay
attention to tabletop and surrounding area!
Tap the touch area to stop!
9954 Warning Desk height error The desk height measurement produced an
implausible value. Check the measurement
range for interfering objects and keep the
area clear while performing the movement.
Reset height?
“Yes” for resetting to the current value
“No” for keeping the old value
9955 Warning Desk positioning Timeout A timeout occurred during positioning.
If the desk is not positioned at its minimum
or maximum height, check if it is blocked
9956 Warning Desk Height Sensor Error The sensor for the desk height measurement
is not responding or transmits a faulty signal.
The height adjustment is not possible.
Check cable connections
Check if the sensor is switched on
The height cannot be adjusted until the
error has been corrected and the
machine has restarted
9957 Warning Height limit control active Height limit control active
Code Type Possible cause Corrective

Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDurkopp Adler
ModelD867 e-con
CategorieNaaimachine
TaalNederlands
Grootte32197 MB