Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 228 van 286
Troubleshooting
226 Operating Instructions D867 e-con - 00.0 - 06/2023
2521 Error Stepper card X70 encoder
plug (Sub-D, 9-pin) not
connected
• Connect encoder cable to the control, use
correct connection
2522 Error Stepper card X70 flywheel
position not found
• Check stepper motor 1 for stiff movement
2530 Error Stepper card X70 not
responding
• Perform software update
• Replace the control
2531 Error Stepper card X70 initializa-
tion failure
• Perform software update
• Check selection of class
2571 Error Stepper card X70 watchdog
(Upper puller)
• Perform software update
• Check selection of class
2572 Error Stepper card X70 motor
overload/overvoltage/over-
current (Upper puller)
• Check selection of class
• Replace the control
• Replace encoder
• Replace stepper motor
2573 Error Stepper card X70 sewing
motor encoder not connected
(Upper puller)
• Replace the control
2574 Error Stepper card X70 sewing
motor encoder not initialized
(Upper puller)
• Perform software update
• Check selection of class
2575 Error Stepper card X70 init position
not found (Upper puller)
• Check for stiff movement
• Replace encoder
• Replace motor
2576 Error Stepper card X70 not
enabled (Upper puller)
• Replace the control
2577 Error Stepper card X70 overload
(Upper puller)
• Check for stiff movement
• Replace encoder
• Replace motor
2578 Error Stepper card X70 encoder
failure (Upper puller)
• Replace encoder
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
