Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 123 van 286
Programming Commander DELTA
Operating Instructions D867 e-con - 00.0 - 06/2023 121
Catch bartack
To ensure a safe sewing start and complete
sewing of the start bartack, an additional
bartack can precede the start bartack.
Only the number of forward and backward
stitches can be selected. The stitch length
cannot be set individually – it corresponds to
the stitch length of the normal start bartack.
On/Off
Number of stitches backwards
Value range
01 - 50
Number of stitches forward
Value range
01 - 50
Number of bartack sections
Value range
01 - 10
First bartack section
The 1
st
section of the bartack can be pro-
grammed with a different number of stitches.
All subsequent sections have the preset
number of stitches from the settings for the
start bartack.
On/Off
Number of stitches
Value range
01 - 50
Last bartack section
The last section of the bartack can be pro-
grammed with a different number of stitches.
All previous sections have the preset num-
ber of stitches from the settings for the end
bartack.
On/Off
Number of stitches
Value range
01 - 50
Invert bartack direction
Normally, a bartack starts either with the
sewing direction (forwards – even number
of sections) or against the sewing direction
(backwards – odd number of sections),
depending on the number of sections.
Setting this parameter inverts the sewing
direction of the bartack.
Value range
On/Off
Icon Parameter Setting
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
