Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 100 van 286
Programming Commander DELTA
98 Operating Instructions D867 e-con - 00.0 - 06/2023
Bobbin monitor mode (see p. 101)
Point position
The distance of the needle from the mate-
rial can be adjusted to allow precise
positioning of the sewing material when
starting sewing. The value entered here
corresponds to the degree number on
the handwheel.
Value range
000 – 359 [°]
Gap
Value for the gap of motor driven edge
guide to the needle (considering the
defined safety clearance to the sewing
feet).
(Access only after activation in the
machine configuration)
Value range
1.0 - 45.0
(depends on the sewing
equipment)
Edge Guide Check Up/Down Mode
To avoid collisions, an electronic proxim-
ity switch checks the position of the edge
guide and keeps the edge guide from
moving.
(Access only after activation in the
machine configuration)
Value range
Off/Up/Down
(depending on the edge guide
position that is to be checked)
Correction top roller
(Access only after activation in the machine
configuration)
Value range
-100 - 100 [%]
Material thickness detection
Material thickness detection Value range
On/Off
(see p. 103)
Sewing foot stroke The sewing foot stroke can be
adjusted to different material
thicknesses by the software.
Icon Parameter Setting
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
