Durkopp Adler 550-D869-100 e-con handleiding
Handleiding
Je bekijkt pagina 94 van 198
Programming Commander DELTA
92 Instructions for use 550-D869-100 e-con - 00.0 - 01/2025
Setting options Sewing foot stroke
Menu item Setting 1 Setting 2
Linear absolute Sewing foot stroke
Value range
00.0–09.0 [mm]
Maximum sewing foot
stroke reached at the upper
material thickness limit.
Min. material thickness
Value range
00.0–10.0 [mm]
Material thickness at which
the increase in sewing foot
stroke should start.
Max. material thickness
Value range
00.0–10.0 [mm]
Material thickness up to
which the increase in
sewing foot stroke should
occur.
Linear with offset Offset
Value range
-09.0–09.0 [mm]
The current value of the
sewing foot stroke is
increased/decreased by
the offset value when the
upper material thickness
limit has been reached.
Min. material thickness
Value range
00.0–10.0 [mm]
Material thickness at which
the increase in sewing foot
stroke should start.
Max. material thickness
Value range
00.0–10.0 [mm]
Material thickness up to
which the increase in
sewing foot stroke should
occur.
2. On/Off Min. material thickness
Value range
00.0–10.0 [mm]
Material thickness from
which the 2
nd
sewing foot
stroke should be used.
2. On Min. material thickness
Value range
00.0–10.0 [mm]
Material thickness from
which the 2
nd
sewing foot
stroke should be used.
Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | 550-D869-100 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 18809 MB |
