Durkopp Adler 550-D869-100 e-con Handleiding (198 Pagina's)

Handleiding

Je bekijkt pagina 85 van 198

Programming Commander DELTA

Instructions for use 550-D869-100 e-con - 00.0 - 01/2025 83

Gap

Value for the gap of motor driven (lateral)

edge guide to the needle (considering the

defined safety clearance to the sewing

feet).

Value range

1.0 - 45.0

(depends on the sewing

equipment)

Material thickness detection

Material thickness detection Value range

On/Off

(see  p. 91)

Sewing foot stroke The sewing foot stroke can be

adjusted at different material thick-

nesses by the software.

Stitch length The stitch length can be adjusted

to different material thicknesses

by the software.

Needle thread tension The needle thread tension can be

adjusted to different material thick-

nesses by the software.

Sewing foot pressure The sewing foot pressure can be

adjusted at different material thick-

nesses by the software.

Max. Speed The maximum sewing speed can

be adjusted to different material

thicknesses by the software.

Correction speed effect

Correction speed effect Value range

On/Off

(see  p. 87)

Stitch length The stitch length changes slightly

depending on the speed. For this

reason, the stitch length can be

adjusted at different speeds by the

software.

Needle thread tension Depending on the sewing speed,

the needle thread tension can be

adjusted at different sewing

speeds by the software.

Button Parameter Settings

Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.