Durkopp Adler 550-D869-100 e-con Handleiding (198 Pagina's)

Handleiding

Je bekijkt pagina 48 van 198

Operation

46 Instructions for use 550-D869-100 e-con - 00.0 - 01/2025

At seam beginning

Backtacking

and sewing

• Press the pedal forwards (position +1) and keep it

there.

Machine sews a start bartack (if specified).

Afterwards, the machine continues to sew - with

increasing speed the further forward the pedal is

pressed.

In the middle of the seam

Stop sewing • Release the pedal (position 0).

Machine stops. Depending on the setting, sewing

feet and needle are up / down.

Continue

the sewing

process (after

releasing the

pedal)

• Press the pedal forwards (position +1)

Machine continues to sew - with increasing speed

the further forward the pedal is pressed.

Changing the

stitch length

• Activate the 2

nd

stitch length using the button on the

push button panel ( p. 41).

Increasing the

thread tension

• Use the button on the push button panel to activate

the additional thread tension ( p. 41).

Backtacking in

the middle of

the seam

• Sew backwards with stitch regulator ( p. 40) or

activate backwards sewing using the button on the

push button panel ( p. 41).

At seam end

Finish the

seam and

remove the

sewing

material

• Press the pedal fully back (position -2) and keep it

there.

End bartack is sewn, and thread is cut (if set).

Machine stops.

The needle is up, and the sewing feet are up.

• Remove the sewing material.

Status Processes

Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.