Durkopp Adler 550-D869-100 e-con Handleiding (198 Pagina's)

Handleiding

Je bekijkt pagina 32 van 198

Operation

30 Instructions for use 550-D869-100 e-con - 00.0 - 01/2025

3. Feed the thread clockwise through the rear tension (14).

4. Feed the thread clockwise around the pin (10) and keep

feeding it clockwise through the front tension (13).

Fig. 9: Threading the needle thread (4)

5. Feed the thread through the hook (9) and then clockwise

through the thread tensioning spring (8) from below.

6. Feed the thread around the pin (4) from left to right and then

from top to bottom through the rear hole of the needle thread

regulator (3).

7. Feed the thread from the right to the left through the lower

guide of the thread lever (2).

8. Feed the thread through thread guide (5).

9. Insert the thread through the left hole of the thread guide (6).

10. Insert the thread through the left hole of the thread guide (7).

11. Insert the thread through the needle eye (towards the groove)

in such a way that the loose thread end faces the hook.

12. Pull the thread through the needle eye until the loose thread

end has a length of approx. 4 mm with the thread lever (2)

at the highest position.

(13) – Front tension (14) – Rear tension

⑭

⑬

Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.