Durkopp Adler 550-D869-100 e-con Handleiding (198 Pagina's)

Handleiding

Je bekijkt pagina 29 van 198

Operation

Instructions for use 550-D869-100 e-con - 00.0 - 01/2025 27

4. Feed the thread clockwise around the pin (11) and keep feed-

ing it clockwise through the front tension (12).

Fig. 6: Threading the needle thread (2)

5. Feed the thread from the right to the left through thread

guide (10).

6. Feed the thread through the hook (9) and then clockwise

through the thread tensioning spring (8) from below.

7. Feed the thread around the pin (4) from left to right and then

from top to bottom through the rear hole of the needle thread

regulator (3).

8. Feed the thread from the right to the left through the lower

guide of the thread lever (2).

9. Feed the thread through thread guide (5).

10. Feed the thread through the right hole of thread guide (6).

11. Feed the thread through the right hole of the thread clamp,

(if thread clamp is present).

For machines with thread clamp (optional)

Fig. 7: Thread clamp

(12) – Front tension (13) – Rear tension

⑬

⑫

Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.