Durkopp Adler 550-D869-100 e-con handleiding
Handleiding
Je bekijkt pagina 103 van 198
Programming Commander DELTA
Instructions for use 550-D869-100 e-con - 00.0 - 01/2025 101
5.7.5 Setting the Segment parameters
There are various options for setting the parameters in the segment.
The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Button Parameter Settings
Seam Parameter
Stitch length Value range
00.0–12.0 [mm]
(depending on the sewing equipment
and the subclass)
Needle thread tension Value range
01 - 99
Sewing foot pressure Value range
01 - 20
Sewing foot stroke Value range
1.0–9.0 [mm]
Max. Speed
It is possible to reduce the maximum
sewing speed at this point.
The maximum sewing speed can be set
in the software at the Technician level.
Value range
0050-3800 [rpm]
(depending on subclass)
Raise presser/sewing foot after sewing stop Value range
On/Off
Height of sewing foot lift at
Sewing stop
Value range
00–20 [mm]
(depending on subclass)
Light barrier
(optional additional equipment)
The light barrier detects the beginning
and the end of the material. After a
signal was detected, sewing can
continue automatically with the
specifically set parameters.
Value range
On/Off
(see p. 135)
Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | 550-D869-100 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 18809 MB |
