Durkopp Adler 550-D869-100 e-con handleiding
Handleiding
Je bekijkt pagina 104 van 198
Programming Commander DELTA
102 Instructions for use 550-D869-100 e-con - 00.0 - 01/2025
5.7.6 Setting the Segment End parameters
There are various options for setting the Segment End parameters.
The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Puller
(optional additional equipment)
The pullers support the transport of the
sewing material.
The feed of the two rollers is calculated
automatically based on the stitch
length of the machine.
An adjustment may be necessary
depending on the application.
The pullers can be adjusted
separately.
The input is in percent: a positive value
increases the roller feed while a
negative value reduces the feed.
On/Off
Correction top roller
Value range
-100–100 [%]
Correction bottom roller
Value range
-100–100 [%]
Button Parameter Settings
Button Parameter Settings
Seam end parameters
Sewing stop Value range
On/Off
(automatic stop at the end of the
segment)
Presser foot lift after thread cutting Value range
On/Off
Height of sewing foot lift after trim Value range
00–20 [mm]
(depending on subclass)
Thread trimmer Value range
On/Off
Bekijk gratis de handleiding van Durkopp Adler 550-D869-100 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | 550-D869-100 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 18809 MB |
