Dreame H12 handleiding
Handleiding
Je bekijkt pagina 11 van 69
17 18
EN EN
Error
Code
Possible Cause Solution
E1-E7
Malfunction
Restart the appliance. If the problem persists,
please contact the customer service.
H1-H6
H7
Battery
overheating
Wait until the battery's temperature returns normal.
Error Icon Possible Cause Solution
Clean water is
insufficient.
Fill the clean water tank.
Used water tank is
full.
Empty the used water tank.
Roller brush is
stuck.
Clean the roller brush.
Tube is clogged.
Refer to the Care & Maintenance section to clean
the tube and dirt sensor (below the used water
tank).
The brush roller
and tube are dirty.
Place the appliance back onto the base for self-
cleaning.
Error Prompts and Solutions
If the appliance is not working properly, the screen display will show an error message. Please
refer to the below table to find your solution.
Specifications
Vacuum
Model HHR44A Rated Power 400 W
Rated Voltage 216 V Charging Voltage 27 V
Clean Water Tank
Capacity
780 mL
Used Water Tank
Capacity
700 mL
Charging Time Approx. 4 hours Run Time
50min (Quiet
Mode)
Charging Base
Model HCBAB Rated Power Input* 670 W
Rated Input
220-240 V
50-60 Hz
Rated Output 27 V 16 A
* The rated input power refers to the power measured during a representative cycle for entering
the drying mode.
* When the appliance is fully charged, it automatically enters standby mode after 10 minutes,
with a power consumption of 049 W.
Bekijk gratis de handleiding van Dreame H12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dreame |
| Model | H12 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 9060 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Grey |
| Ingebouwd display | Ja |
| Gewicht | 5100 g |
| Motor vermogen | 300 W |
| Stroombron | Batterij/Accu |
