Draytek VigorSwitch P2282x handleiding
Handleiding
Je bekijkt pagina 10 van 366
2
I-1-2 LED Indicators and Connectors
LED
Status Explanation
On (Red) An alert for system failure due to overheating or wrong voltage.
Monitor
Off The device is in normal condition and running normally.
Blinking
(Green)
The power is over (>) 80% watts PoE power budget.
Alert
Off The power is under (<) 80% watts PoE power budget.
On (Green) The switch finishes system booting and the system is ready.
Blinking
(Green)
The switch is powered on and starts system booting.
SYS
Off The power is off or the system is not ready / malfunctioning.
On (Green) The device is powered on and running normally.
PWR
Off The device is not ready or is failed.
On (Green) The port is supplied with PoE power.
PoE 1~24 (for
P2282x)
Off No PoE power is supplied on the port.
On (Green) The device is connected with 1000Mbps.
On (Amber) The device is connected with 10/100Mbps.
Blinking The system is sending or receiving data through the port.
RJ45 (LNK/ACT) Port
1 ~ 24
Off The port is disconnected or the link is failed.
On (Blue) The device is connected with 10Gbps.
On (Green) The device is connected with 1000Mbps.
Blinking The system is sending or receiving data through the port.
Port 25 ~ 28
(SFP+)
Off The port is disconnected or the link is failed.
RJ45 (LNK/ACT)
Port 1 to Port 24
PoE for Port 1 to Port 24
SFP
(
LNK/ACT
)
Bekijk gratis de handleiding van Draytek VigorSwitch P2282x, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draytek |
| Model | VigorSwitch P2282x |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 71233 MB |
