Draper Expert 20115 handleiding
Handleiding
Je bekijkt pagina 8 van 12
6. Operation & Use
6.2 Fitting The Handle (g.4)
• Connect the parts of the handle together and select
the length required (H).
• Fit the extendable handle to either the forward or
reverse handle by aligning the groove at the end of the
handle shaft with the notch and twist to lock in place.
6.3 Pulling/Lifting A Load (g.5)
• Forward operation – t the extendable handle to (I).
Move the handle back and forth to pull the wire rope
through the Puller.
Note: For safety the lever is tted with a sheer pin. If the
load exceeds the maximum capacity the pin will break.
Refer to the Draper Tool website for a suitable
replacement part.
6.4 Lowering A Load (g.6)
• Use reverse operation – t the extendable handle to
(J). Move the handle back and forth to push the wire
back through the puller.
Note: To remove the wire rope completely, the release
lever must be locked forward.
Maintenance and Troubleshooting
6.5 General Maintenance & Storage
• After use, wind the wire rope back onto the reel. Wipe
o any dirt and inspect for any damage that may have
occurred during the pulling process.
• When the Puller is not being used, unlock the release
lever and store in a safe, dry and childproof location.
Wipe over with a slightly oiled cloth.
– 8 –
4 Fig.
5 Fig.
6 Fig.
(H)
(I)
(J)
Bekijk gratis de handleiding van Draper Expert 20115, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | Expert 20115 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1469 MB |
