Draper Expert 20115 handleiding
Handleiding
Je bekijkt pagina 7 van 12
6.1 Assembly
NOTE: Take care when lifting as the product is heavy.
Inserting the wire rope (g.1 – g.2)
Note: for the rst 10 – 15 operations the release lever
(A) will be dicult to operate. This is normal and will
ease with use.
• To open the internal jaws, hold both the release lever
(A) and reverse handle (B). Then push down and slide
forward until the release lever locks into position.
• Insert the wire rope into the feed guide (C) and direct it
through until it runs above the anchor pin. Pull the
rope through to take up any slack, then push the
release lever (A) back down to unlock. Use the forward
handle (D) to feed the wire rope through.
Anchor Pin Fitting (g.3)
• Ensure the Puller is secured to a suitable anchor point
which can take the capacity load specied.
• Pass the anchor pin (E) through the housing. To secure
rotate the pin and push to fully lock in place (G).
• For additional safety, if required, secure by tting an
appropriately sized clevis pin (not supplied) through
the small hole (F) in the pin.
6. Operation & Use
Important: Before operating this product, read and
understand all the safety instructions listed in this
manual. Ensure that the product is fully assembled and
correctly prepared for use.
– 7 –
EN
1 Fig.
2 Fig.
3 Fig.
(B)
(D)
(A)
(A)
(C)
(G)
(F)
(E)
Bekijk gratis de handleiding van Draper Expert 20115, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | Expert 20115 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1469 MB |
