Draper Expert 19197 handleiding
Handleiding
Je bekijkt pagina 6 van 16
5. HEALTH AND SAFETY INFORMATION
- 6 -
- 11 -
GENERAL SAFETY INSTRUCTIONS
Warning: Please read all safety warnings and all details carefully. Failure to follow the warnings
may result in serious injury or major component damage.
Important: Draper Tools recommends that this product should not be modified or used for any
application other than that for which it was designed.
Save all warnings and instructions for future reference.
1) Personal safety
a) Stay alert, watch what you are doing and use common sense when using this product.
Do not use this product while you are tired or under the influence of drugs, alcohol or any
medication. A moment of inattention while using this product may result in serious personal
injury.
b) Use personal protective equipment as necessary.
c) Check and remove any part of the product before turning/testing the engine. A part left
attached to a rotating part of the engine may result in personal injury or major component
damage.
d) Carefully clean the tool components after every use.
f) Keep the tool components safe and tidy.
g) Do not use this product for any purpose other than for which it is designed.
Warning! Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure it is disposed of correctly; according to
local regulations.
9. PROCEDURE AND APPLICATION GUIDE
Component C = Crankshaft sprocket holding tool
Loosen off the end bolt of component C so the split collet components are fully retracted and
insert the assembly into the end of the crankshaft and screw it in as far as it will go. Turn the
end bolt clockwise so that the split collet components of C expand and grip the crankshaft
sprocket inside the engine. Now component A can be removed with the vibration damper.
Components B = Crankshaft sprocket holding tool adaptor
Fit component B as shown, ensure the larger tooth on component D corresponds with the
larger tooth on the crankshaft sprocket as shown by X.
Component D = Crankshaft sprocket holding tool nut
Fit the holding tool nut D and tighten. If required the crankshaft is now safe to turn by turning
the larger Hex of D. Only turn the engine over with the spark plugs removed.
Bekijk gratis de handleiding van Draper Expert 19197, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | Expert 19197 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1684 MB |
