Draper D20 60508 handleiding

24 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 17 van 24
9. OPERATION
9.4 USING MANDRELS – FIGS.6 – 7
The most common types of mandrel to use with
this tool include the standard mandrel which is
used with cut-off discs, grinding wheels, emery
wheels, and cut-off wheels. Screw mandrels are
used with polishing wheels and polishing drums.
Drum mandrels are used with sanding drums.
To install:
Remove the battery pack.
Install the mandrel.
If using the standard mandrel:
Press and hold the spindle lock.
Insert the slot end of the provided wrench into
the slot on top of the mandrel and unscrew.
Remove mandrel screw and washer.
Place desired accessory over mandrel shaft
and align accessory hole with mandrel hole.
Insert mandrel screw with washer through the
accessory and mandrel shaft holes.
Note: The mandrel washer should be placed
between the mandrel screw and the accessory.
Tighten using provided wrench.
If using the screw mandrel:
Align desired accessory hole with mandrel
screw head.
Screw accessory onto mandrel by twisting
clockwise until secure.
If using the drum mandrel:
Align appropriate sized sanding drum (16/17)
over mandrel and push down to completely
cover drum end of mandrel.
Note: If necessary, tighten the screw on the drum
mandrel head to expand the drum and securely
hold the sanding drum in place.
9.5 BALANCING ACCESSORIES
For precision work, it is important that all
accessories be properly balanced. To balance
an accessory, slightly loosen the collet nut and
give the accessory or collet a 1/4" turn.
You should be able to tell by the sound and feel
if the accessory is running in balance. Continue
adjusting in this fashion until the best balance is
achieved. Replace accessories if they become
damaged or unbalanced.
– 17 –
(9)
(16/17)
6 FIG.
7 FIG.

Bekijk gratis de handleiding van Draper D20 60508, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDraper
ModelD20 60508
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2581 MB