Draper 84131 handleiding
Handleiding
Je bekijkt pagina 8 van 12
– 8 –
6. Preparation Instructions
Important: Before preparing or adjusting this product, read and understand all the safety instructions listed in this
manual.
6.1 Preparing the Air Supply for Use (Fig.1)
1 Fig.
Air Tool
Whip Hose
Air Supply
Drain Daily
Drain Daily
DO NOT INSTALL
QUICK COUPLER
HERE
Air Line
Hose
Air Line
Adaptor
Air Line
Adaptor
Quick
Coupler
Quick
Coupler
Air Filter/
Regulator/Oiler
• This air tool operates at a max. pressure of 6.2bar
(90psi).
• ISO grade 22–32 (SAE grade 5W–15W) monograde oil
should be used in this air tool.
• During use, the oil must be constantly supplied to the
equipment to ensure complete lubrication and
optimum performance.
• The compressed air system must be controlled by a
combination pressure regulator, in-line lubricator and
moisture lter. This will ensure a constant supply of
dry air at all times, provided it is properly maintained.
Important: ALWAYS check the machine operating
pressure before use.
• Water in the compressor tank may cause
considerable corrosion to air tools; the compressor
should be drained daily to avoid excessive water in
the air supply. Dirty or wet air can signicantly
shorten the lifespan of the product.
• When using an air tool with a hose over 25ft long,
Draper Tools recommends increasing the bore of the
hose to the next largest available size (i.e. increase
3⁄8" to 1⁄2"). This will ensure adequate pressure and
volume of air to power the tool.
Bekijk gratis de handleiding van Draper 84131, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 84131 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1767 MB |
