Draper 84126 handleiding
Handleiding
Je bekijkt pagina 5 van 12
– 5 –
EN
Important: Read all the Health and Safety instructions
before attempting to operate, change accessories,
maintain or repair this product. Failure to follow these
instructions may result in injury or damage to the user,
the product or the workpiece.
4.1 General Health and
Safety Precautions
• Only qualied and trained operators should use or
adjust the ratchet for threaded fasteners.
• DO NOT modify this ratchet. Modications can
reduce the eectiveness of safety measures and
increase the risks to the operator.
• Retain the safety instructions for future reference and
use by the operator.
• DO NOT use the tool if it has been damaged.
• Inspect the tool periodically to verify that the ratings
and markings required are attached and legible.
• Keep bystanders away during operation.
• ALWAYS Wear appropriate personal protective
equipment (PPE) including eye, ear and
hand protection.
• Have your tool serviced by a qualied repair person
using only identical replacement parts.
4.2 Additional Safety Instructions for
Compressed Air
WARNING!
Compressed air can cause severe injury.
• ALWAYS turn o and disconnect the air supply before
changing accessories, making any adjustments to the
product or leaving it unattended.
• NEVER direct this product towards yourself or others.
• Ensure that compressed air is not blocked by or in
contact with any part of your body.
• ONLY use clean, dry and regulated compressed air.
WARNING!
NEVER use oxygen, combustible
gases or other bottled gases as a supply for
this product. Use of these substances may
cause the product to explode.
• Draper Tools recommends the use of a whip
hose between the tool and the air supply to
reduce vibration.
WARNING!
Whipping hoses can cause severe
injury. Always check for and replace damaged or
loose hoses and ttings.
• Ensure that the product is compatible with the air
supply before use.
• Ensure all connections are securely tightened.
• Where universal twist couplings (claw couplings) are
used, lock pins must be installed and whip check
safety cables must be used to safeguard against
possible hose-to-tool or hose-to-hose failure.
• DO NOT exceed the maximum stated air pressure.
• The use of an inline water separator, lubricator and
pressure regulator should be used to control the
pressure of the air being supplied to the tool.
• DO NOT obstruct the ability of the trigger to release
once depressed.
• NEVER carry the tool by the air line.
4.3 Additional Safety Instructions for
Air Ratchets
WARNING!
• Wear suitable gloves to protect hands.
• Keep hands, loose clothing, hair etc. away from the
rotating spindle or drive of the impact socket.
• NEVER hold the drive, socket or drive extension.
• There is a risk of injury if hands are not kept away from
the impact socket especially in conned spaces.
• Failure of the workpiece, accessories or even of the
inserted socket itself can generate high-velocity
projectiles.
• Always wear impact-resistant eye protection during
the operation of the ratchet. The grade of protection
required should be assessed for each use.
• Direct the exhaust port away from yourself and to
minimise disturbance of dust in the work area.
• Ensure that the workpiece is securely xed.
• Disconnect the tool from the energy supply before
changing the inserted tool or accessory.
• DO NOT touch sockets or accessories during
impacting, as this increases the risk of cuts, burns or
vibration injuries.
• Use only sizes and types of accessories and
consumables that are recommended by the
tool manufacturer.
4. Health and Safety Information
Bekijk gratis de handleiding van Draper 84126, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 84126 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1668 MB |
