Draper 84126 handleiding
Handleiding
Je bekijkt pagina 4 van 12
– 4 –
3.2 Specication
Stock No. 84122 84126
Part No. DAT-AR12 DAT-AR38
Square drive 1/2" 3/8"
Maximum torque 85Nm/60lb-ft 85Nm/60lb-ft
Maximum operating air pressure 90psi (6.2bar) 90psi (6.2bar)
Average air consumption 113L/Min (4cfm) 113L/Min (4cfm)
Speed (no load) 160rpm 160rpm
Maximum air line size (ID) 3/8" (10mm) 3/8" (10mm)
Air Inlet 1/4" BSP 1/4" BSP
Noise emissions
Sound pressure level 87dB (A) 87dB (A)
Sound power level 98dB (A) 98dB (A)
Vibration level 4.35M/S
2
4.35M/S
2
Net weight 1.22kg 1.21kg
3.1 Intended Use
This air ratchet is designed to remove and install
threaded fasteners.
Any other application beyond the conditions established
for use will be considered misuse. Draper Tools accepts no
responsibility for improper use of this product.
Read this manual in full before attempting to assemble,
operate or maintain the product, and retain it for later use.
3. Product Introduction
Important: The declared vibration total values and noise
emissions values have been measured in accordance
with a standard test method and may be used for
comparing one tool with another. These values may also
be used in a preliminary assessment of exposure.
WARNING!
The vibration and noise emissions
during actual use of the product can dier
from the declared values depending on the type
of work and the area upon which it is used.
Before each use, estimate the likely exposure
resulting from the actual conditions of use.
Take into account all parts of the operation
cycle in order to identify any safety measures
required to protect the operator.
Bekijk gratis de handleiding van Draper 84126, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 84126 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1668 MB |
