Draper 80946 handleiding
Handleiding
Je bekijkt pagina 12 van 16
– 12 –
7. Assembling the Dust Extractor
12 Fig.
11 Fig.
10 Fig.
9 Fig.
8. Attach the hose:
a. Slide the hose clamps (J) over either end of the
hose (H).
b. Attach one end of the hose to the hose outlet
(Fig. 9) and the other to the collection bag duct
(Fig. 10).
c. Adjust the clamps as required to secure the hose
in place.
9. Attach the collection and lter bags:
a. Open the collection bag (D) and slide it up over the
lower rim of the collection bag duct (C), using the
rubber band to hold it in place.
b. Pass a strap (N) around the collection bag duct so
that it runs between the duct and the support rods
and over the bag and rubber band.
c. Hook the strap spring over the toothed end and
close the clamp for a tight but comfortable t
against the lower rim of the duct (Fig. 11).
d. Pass the toothed end of the other strap around the
inside of the seam at the open end of the lter bag
(F) (Fig. 12).
e. Pull the lter bag over the upper rim of the
collection bag duct and use the clamp to secure it
in place.
f. Hang the loop on the top of the lter bag over the
upper support rod.
(H)
(I)
(C)
Bekijk gratis de handleiding van Draper 80946, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 80946 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3011 MB |
