Handleiding
Je bekijkt pagina 15 van 20
9. Maintenance and Troubleshooting
Important: Read all the Health and Safety information in
this manual before attempting to maintain this product.
All maintenance should be carried out ONLY by
authorised and suitably qualied personnel.
WARNING!
ALWAYS ensure that the wheels are
locked and that the heater is switched o,
disconnected from the power supply and has fully
cooled before attempting any maintenance on this
product.
9.1 General Maintenance and Storage
• Keep the heater clean and dry.
− Clean the heater body using a dry cloth ONLY.
− Clean the heater reectors using a dry cloth
ONLY; see section 9.3 Cleaning the Reectors
− Clean the heater grilles using a dry cloth or brush,
ensuring that all dust and debris is collected and
removed from the heater.
• Any maintenance to the plug and power cable MUST
be carried out by Draper Tools or its authorised
representative.
• Any repairs to the heater must be carried out by
suitably qualied personnel.
• The heater should be inspected at least once a year by
suitably qualied personnel.
• Store the heater in a clean and dry location, out of
reach of children.
9.2 Removing and Replacing the Fireguard
The reguard (5) must be removed to access the heating
elements and reectors for maintenance.
1. To remove the reguard:
11 Fig.
(6)
a. Unscrew and remove the reguard attachment
screws (6).
b. Tilt the reguard forwards and slide the stems out
of the retaining holes.
2. To reinstall the reguard:
a. Insert the protruding stems at the base of the
guard into the retaining holes beneath the heater
opening.
b. Tilt the reguard upwards until the loops at the top
of the guard align with the openings above the
heater opening.
c. Screw the reguard attachment screws through
the loops to secure it in place.
9.3 Cleaning the Reectors
The heater reectors should be kept clear of dust, debris
and other obstructions in order to prevent damage to the
heating elements.
To clean the reectors, remove the reguard (see 9.2
Removing and Replacing the Fireguard) and wipe them
gently with a ne dry cloth. Replace the reguard when
complete.
CAUTION! The surface of the reectors is very soft. DO
NOT use abrasive materials or solvents to clean the
reectors as scratches or corrosion damage may cause
the unit to overheat.
– 15 –
EN
Bekijk gratis de handleiding van Draper 04746, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | 04746 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2939 MB |
