Handleiding
Je bekijkt pagina 28 van 52
A-24
t1 appears.
Use the arrows to select the desired timing (00:20)
Press on the number of the menu to confirm (ex. # 2)
E1 appears.
Use the arrows to select the appropriate code (0001 for the steam)
Press on the number of the menu to confirm (ex. # 2)
Step #2 Suggested values
SP2 appears.
Use the arrows to adjust to the desired temperature (375°F)
Press on the number of the menu to confirm (ex. # 2)
t2 appears.
Use the arrows to select the desired timing (20:00)
Press on the number of the menu to confirm (ex. # 2)
E2 appears.
Use the arrows to select the appropriate code (0000 for no event)
Press on the number of the menu to confirm (ex. # 2)
Step #3 Suggested values
SP3 appears.
Use the arrows to adjust to the desired temperature (375°F)
Press on the number of the menu to confirm (ex. # 2)
t3 appears.
Use the arrows to select the desired timing (00:15)
Press on the number of the menu to confirm (ex. # 2)
E3 appears.
Use the arrows to select the desired code (0010 for the buzzer)
Press on the number of the menu to confirm (ex. # 2)
To get out of the programming mode, press #12 and then press "CLOCK" twice (#12, CLOCK,
CLOCK). The screen will show 00:00.
After fulfillment of this program:
• The oven will continue to heat because there was a temperature included in step 3. If the
temperature at that step would have been of 0°F, the oven would have stopped at the end
of the program.
• In this example, the inside buzzer will work 15 seconds while the outside buzzer will start
and will not stop until another program is selected.
• If you want to end a program already running, press the button corresponding to that
menu and then choose a pause menu. If you stop a program that was running without
choosing another menu, it will be paused in the conditions in which it was stopped. Ex:
If there is an interruption during a steam cycle, it will keep running until you choose
another menu. However, there is a 45 seconds limit time for the steam, independent from
the Watlow controller.
Bekijk gratis de handleiding van Doyon JA4SC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Doyon |
| Model | JA4SC |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 4386 MB |
