Handleiding
Je bekijkt pagina 27 van 52
A-23
t2 appears.
Use the arrows to select the desired timing (00:15)
Press on the number of the menu to confirm (ex. # 1)
E2 appears
Use the arrows to select the appropriate code (0010 for buzzer)
Press on the number of the menu to confirm (ex. # 1)
Step #3 Suggested values
SP3 appears.
Use the arrows to adjust to the desired temperature (400°F)
Press on the number of the menu to confirm (ex. # 1)
t3 appears.
Use the arrows to select the desired timing (00:01)
Press on the number of the menu to confirm (ex. # 1)
E3 appears.
Use the arrows to select the desired code (0000 for no event)
Press on the number of the menu to confirm (ex. # 1)
To get out of the programming mode, press #12 and then press "CLOCK" twice (#12, CLOCK,
CLOCK). The screen will show 00:00.
Note: You should always use menu #1 for preheating because the controls starts automatically with
this menu.
WARNING
Never use program #1 for a steam cycle because it will start automatically when the oven is
turned on.
EXAMPLE 2 (Cooking program with steam cycle)
- For menu #2, we will program it so that we have a steam injection of 20 seconds, a cooking time
of 20 minutes at 375°F followed by a 15 seconds buzzer.
To access programming mode:
• Press both arrows simultaneously for 5 seconds. Both lights light up to show that the
programming mode is working.
• Select the menu number (Ex. #2)
Step #1 Suggested values
SP1 appears.
Use the arrows to adjust to the desired temperature (375°F)
Press on the number of the menu to confirm (ex. # 2)
Bekijk gratis de handleiding van Doyon JA4SC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Doyon |
| Model | JA4SC |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 4386 MB |
