Dotco 10L2565-01 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768/ 68

Afdrukken

Je bekijkt pagina 3 van 68

Page3

GS-2007

02-2014

AIR SUPPLY:

Inspecttheairhoseandttingsthoroughly.Donotuse

damaged, frayed or deteriorated hoses. A hose rupture

can cause serious injury.

Connectthetooltoanairlinewithcleandryairanda

maximumpressureof90psig(6.2bar).

Neverconnectaquickdisconnectttingattheairinlet

ofgrinderswithawheeldiameteroffourinches(10cm)

or greater.

Adjust the airline lubrication to a minimum to reduce

possible contamination of the environment by the

exhaustair.

Always disconnect the tool from the air supply before

performing any adjustments, repairs or installation of an

abrasive device.

Immediately shut off the tool in the case of unusual

sound or vibration.

Turn off the air supply, bleed the air pressure and

disconnectthetoolfromtheairhose.Haveaqualied

person check the tool and repair before placing back

into service.

Ifrepairsarenecessary,useonlyApexToolGroup,LLC

orApexToolGroup GmbH & Co. OHG manufactured

replacement parts.

PRODUCT OPERATION:

Safety glasses or a face shield must be worn when

operating these tools. Wear gloves that do not restrict

proper operation of the tool, ear protection and

other protective equipment, as required by the work

environment and grinding application.

Donotwearloose clothing,jewelryorringsandkeep

longhairawayfromtool.Avoiddirectskincontactwith

lubricants, grease or adhesives.

Make certain all personnel in the immediate area of the

grinding operation are equipped with the appropriate

personal protective equipment before operating the

tool.

Keep the tool clean and dry to provide the best possible

grip.Thetoolshouldbeheldinsuchawaytoassure

safe and comfortable operation. Keep your body stance

balanced and do not overreach while operating this

equipment.

Power tools can vibrate during use. Vibration and

repetitive motions may be harmful. Stop using this

equipment immediately if you experience discomfort,

a tingling sensation or pain and seek medical advice

before resuming operation.

Theprimarysourceofvibrationwhenusingaportable

grinderisanabrasivewheelthatisoutofbalance,outof

round, untrue, or possibly a combination of all three. The

useofqualityabrasivewheelsthatarewellbalanced,

roundand true ishighly recommended tosignicantly

reduce tool vibration.

Avoidexcessivepressureorsuddenimpactofthecutting

deviceontheworkpiece.

Donotlaythetooldownuntilthecuttingdevicehascome

to a complete stop. Make certain the tool has stopped

before moving to a different location.

Never carry or drag the tool by grasping the air supply

line.

SAFETY MAINTENANCE CHECKLIST:

CAUTION

Implement a comprehensive safety maintenance

program to provide regular inspection for all phases of

tooloperationandairsupplyequipment.Replaceworn

or damaged parts using only genuine brand replacement

partsmanufacturedbyApexToolGroup,LLCorApex

Tool Group GmbH & Co. OHG.

Daily:

Visual inspection of air supply hose and •

connections.

Inspectallexternaltoolcomponents•

Inspect the cutting device for cracks or damage•

Make sure the cutting device is securely mounted.•

Checkthetoolforexcessivevibrationornoise.•

Weekly:

Inspect the air supply hose for damage.•

Make sure the air inlet adapter is securely •

tightened.

Make sure all tool fasteners are properly tightened.•

Inspectthewheelguard(ifequipped)fordamage.•

6 Months or sooner if needed:

Check individual parts and replace as necessary•

Replace all O-ring and seals•

Onlyqualiedandtrainedpersonnelshouldrepairthis

equipment. Refer to the Sales and Service Center listing

onthebackofthisdocumentforauthorizedApexTool

Group, LLC or Apex Tool Group GmbH & Co. OHG

repair facilities.

SAFETY SIGNAL WORDS:

Indicatesanimminenthazardoussituationwhich,ifnot

avoided,willresultindeathorseriousinjury.

Indicatesapotentiallyhazardoussituationwhich,ifnot

avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury or

property damage.

Indicates information or a company policy that is not

related to the safety of personnel.

The original language of this manual is English.

DANGER

WARNING

CAUTION

NOTICE

General Safety

Pneumatic Grinders

EN

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768/ 68

Bekijk gratis de handleiding van Dotco 10L2565-01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Dotco (Niet gecategoriseerd)

Handleiding bekijken

Dotco 10N2080-01

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd