DoorBird D3100E handleiding
Handleiding
Je bekijkt pagina 11 van 76
ENGLISH
11
MOUNTING THE FRONT COVER
Make sure that the protective cap is screwed onto the connection socket. Mount the front cover including the
main unit to the mounting back casing.
The mounting of the front cover varies depending on the series models and the models ordered via the
DoorBird Configurator (“DBI” is part of the device name).
ACTIVATING THE DEVICE
Switch on the power leading to the assembly location again. Turn on the PoE+ switch/PoE+ injector that is
connected to the device.
You can see if the device is powered by checking the Diagnostic-LED, which lights up after about 30 to 60
seconds after the power is connected. The device is ready for operation (booting up process, any software
updates, etc.) once it has emitted a short diagnosis sound from the integrated loudspeaker. This may last for up
to 5 minutes. If the Diagnostic LED does not light up, please check the power supply. Please also check whether
you have used a wall-plug power supply and not PoE and whether you have connected the positive pole and
negative pole to the device correctly.
Insert and tighten the safety screws.
Press the front cover into the mounting
back casing.
D31x series model
Slide the front cover upwards.
8.2
D31x
3D Configurator model
Slide the front cover downwards.
8.2
DBI
Bekijk gratis de handleiding van DoorBird D3100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DoorBird |
| Model | D3100E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8309 MB |
