DoorBird D1101KH handleiding
Handleiding
Je bekijkt pagina 14 van 68
14
8
ASSEMBLE THE DEVICE TO THE MOUNTNG HOUSING (BACKBOX)
Assemble the front panel with the attached Main Eletrical Unit carefully using the orange (Torx+Pin) screw driver
provided.
While turning the screws clockwise, press the front panel firmly onto the housing until the screws are tightened.
NOTICE
Tighten the safety screws by hand only (less than 5 newton meter [Nm]), otherwise the Main Eletrical
Unit housing may be damaged.
9
ACTIVATE THE DEVICE
If the device is to be supplied with power by a mains adapter, plug the power adapter of the device into a wall
socket. If the device is to be powered via PoE, switch on the PoE-Switch/ PoE-Injector which is connected to the
device. If the device is to be powered via DIN-rail power supply, switch on the DIN-rail power supply.
The Diagnostic-LED indicates whether the device is supplied with power. This LED lights up in green color a few
seconds after you have connected the device to the power supply.
If the Diagnostic LED does not light up, please check the power supply. When using a wall-plug power supply
and not PoE please check whether you have connected the positive pole and negative pole to the device
correctly.
D1101V D1102V
D1101KH
Bekijk gratis de handleiding van DoorBird D1101KH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DoorBird |
| Model | D1101KH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8861 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Stainless steel |
| Gewicht | 1595 g |
| Breedte | 214 mm |
| Diepte | 48 mm |
| Hoogte | 179 mm |
