DoorBird A1131 handleiding
Handleiding
Je bekijkt pagina 8 van 60
8
CONNECTING AND POWERING THE DEVICE
You can connect the device to the network by either using a network cable with PoE or a WiFi 2.4 GHz
connection and power supply unit. It is possible to connect the cables and wires to the device conveniently and
safely. You can connect all necessary cables and wires to the device now.
Install a network cable (which is plugged into a network switch /
router with Internet access) from the inside of your building to the
assembly location. When connecting the camera, make sure to pull the
waterprotection housing over the plugs. The network cable between the
assembly location and the network switch / router can have a maximum
length of 80 m/262 ft (IEEE 802.3). If you must span a distance of more than
80 meters/262 feet you can put a network switch in between. Make sure to
use a high-quality Cat.5 network cable or better and with proper shielding
(Screened Foiled Twisted Pair (S/FTP or SFTP) whereby the shield is connected to
the outer metal shield of the RJ45 plug (8P8C).
To power the device via a PoE-Switch (e.g. D-Link DGS-1008P) or PoE-Injector (e.g. DoorBird Gigabit
PoE Injector A1093), use a CAT.5 cable or higher in accordance with the PoE standard IEEE 802.3af
Mode A.
You can find further information about PoE here: http://www.doorbird.com/poe
www
OPTION (RECOMMENDED)
Power supply and network connection using PoE (Power over Ethernet)
Bekijk gratis de handleiding van DoorBird A1131, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DoorBird |
| Model | A1131 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7781 MB |
