Dometic DG3 handleiding
Handleiding
Je bekijkt pagina 4 van 16
EN
WARNING! Risk of property damage, serious
injury, or death
Read and understand this and any other applicable
manual before operating the equipment.
Use the gyroscopic stabilizer only as intended.
Do not operate the gyro while trailering the boat or
while the boat is on a li.
This manual contains important safety information that
you may need if a problem occurs while on the water.
Keep the manual on the boat.
WARNING! Risk of serious injury or death
When instructed to remove power from the gyro,
disconnect both sources.
WARNING! Scalding hazard
Hot pressurized coolant can cause serious burns
Do not remove the coolant tank cap when the system
is hot. Wait two hours aer the flywheel has stopped
rotating.
Open the coolant tank cap slowly.
CAUTION! Risk of property damage or injury
Do not stand on the protective covers or use any part of
the gyro as a step.
Do not store anything on top of the gyro.
Do not place anything on or around the harness and
hose connections to the gyro.
CAUTION! Minor shock hazard
While 48 V is a touch-safe voltage, contact with the 48 V
system may result in a minor electric shock when skin is
wet, which can cause pain, muscle spasms, or secondary
injuries from reacting to the shock.
Shut off both the 48 V battery and house battery
switches before removing the top cover.
Use caution when hands are in the vicinity of the gyro
electrical connections or the dedicated 48 V battery.
NOTE You can find a QR code with a link to download
an electronic version of this manual on the MFD's gyro
control page. See Multi-function display (MFD) on
page6 for more information.
4.3 Gyro safety decals
The gyro is supplied with decals that warn of safety hazards,
reproduced here for reference. In the event a decal is damaged or
otherwise illegible, contact Dometic for a replacement. Contact
information can be found in Warranty on page12
WARNING
Improper installation and/or maintenance may result in
property damage, personal injury and/or death.
Prior to every use:
• Verify all mounting fasteners are secure.
• Inspect mounting structure for signs of damage.
Installation, use and maintenance:
• Refer to instructions for installation guidelines.
• Do not operate gyro with any cover removed.
• Read and comply with safety and operating guidelines
prior to use.
• Do not operate gyro if any component is not in proper
working condition.
• Perform maintenance in accordance with instructions.
• Ensure all electrical connections are secure and free from
corrosion.
• Ensure all plumbing connections are secure and leak free.
dometic.com
DG3 GYRO
12V / 24V / 48V
Ignition Protected
SAE J1171, ISO 8846:1990
WARNING
Pinch point hazard – moving parts can crush and cut.
Improper installation may result in property damage, personal injury
and/or death.
SAFETY NOTES
• Product weight 580LB [263KG].
Before first operation:
NOTICE
• Confirm clearances around product meet
installation guidelines.
• Confirm electrical connections are secure and
compliant with ABYC standards.
• Confirm plumbing connections are secure and
leak free.
• Confirm fasteners are secure and tightened
according to installation guidelines.
• Remove spreader bar and reinstall
top cover before operating unit.
• Do not operate product with covers
removed.
• Do not service product until
flywheel is stationary and power is
disconnected.
• Refer to instructions for installation guidelines.
• Read and comply with safety and operating guidelines prior to use.
• Use only Dometic spreader bar part # 103009 to li product.
• Ensure liing equipment is rated appropriately and safe liing
procedures are followed.
• Only trained persons shall perform maintenance or service on this
product.
WARNING
• Keep covers in place.
• Keep hands clear while operating.
• Confirm flywheel is stationary and
disconnect power before servicing.
Pinch point hazard – moving parts can
crush and cut.
5 Target groups
The instructions in this manual are intended for persons who will
use the device.
6 Intended use
The gyroscopic stabilizer is intended to be used to improve the
comfort of boat and yacht users by decreasing the roll motion
caused by waves. The gyroscopic stabilizer is not intended to
correct instability resulting from operation in sea conditions
beyond the vessel's design limits or from poor hull design. The
4
Bekijk gratis de handleiding van Dometic DG3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dometic |
| Model | DG3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2069 MB |
