Dito Sama 602314 handleiding

Handleiding

12345678910111213141516171819202122/ 22

Afdrukken

Je bekijkt pagina 12 van 22

12

the distribution network with a mechanical lter and a shut-o󰀨 valve.

Before connecting the lter, let a certain amount of water ow to purge the pipe of any debris.

Note: Use the connecting hose supplied with the appliance.

4.3.1. DRAINAGE

Wastewater must be discharged through a suitable drainage system (gravity).

4.4 BEFORE FIRST USE

It is neccessary to run a cleaning cycle (CYc.4) before rst use (see paragrapf 1.1.2 of chapter V).

Place the basket and its lid in place before the cycle starts.

V. INSTRUCTIONS FOR OPERATOR FOR NORMAL MACHINE USE

This appliance is designed and manufactured for use in various applications, but always and only

concerning the washing of fruit and fresh vegetables. Use the appliance in conformity with the techni-

cal data.

IMPORTANT:

• Do not spin dry heavy products.

• Never start the vegetable washer without water in tank.

• The degree of dirtiness due to chemical contaminants, soil, etc., present on the vegetables can vary

considerably. For correct use of the vegetable washer, do not wash products that are excessively

dirty with such contaminants and soil.

• The vegetable washing process essentially consists of removing the substances (dirt) present on the

surface of the products.

Washing quality mainly depends on the following factors:

-

quantity of product to be washed (do not exceed the maximum values given in the technical data table),

- intensity of water recirculation,

- washing time, presence or not of pump activation pauses during washing,

- frequency of tank emptying (partial or total). With average “dirt”, the tank should be emptied every 1

or 2 wash cycles.

•

Before and after washing, the vegetables must be kept in places having adequate hygienic conditions.

Description of control panel:

A description of the functional components is given in g. 2.

1. VEGETABLE WASHER/DRYER USE

1.1. STARTUP

Appliance operation provides for the following sequential work cycles:

• loading with even distribution of the product inside the drum,

• lid closing,

• selection of operating mode:

AUTO - automatic

MAN. - manual managed by the operator.

1.1.1. STARTING

Press key 1 to switch the appliance on. A display test is carried out. At the end, the LED “I” (indicating

selection of low water pump speed), the left LED above key 4 (indicating washing with automatic cycle

without using sanitising product) and the LED between the On/O󰀨 keys (pos.1) remain on.

The display shows the message “Cyc1”: indicating that automatic cycle 1 is selected.

12345678910111213141516171819202122/ 22

Bekijk gratis de handleiding van Dito Sama 602314, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Wasmachine